Date: Sun, 6 Aug 2006 19:20:37 +0900
From: no@ann.co.jp
Subject: [pasml 209109] CPU メモリ HDD を交換したのですが起動できません
To: pasml@ann.co.jp
Message-Id: <200608061020.k76AKbUP025072@ns.pas2.jp>
X-Mail-Count: 209109
お名前 : まゆかみ-PC初心者-PC不慣れ 困りごと掲示板から
URL : bbsb+lg359231
質問URL: http://pasokoma.jp/bbs.shtm?num=363574&ope=v
ツリー: http://pasokoma.jp/cgi/tree.cgi?num=363574
--
メーカー名:SOTEC ソーテック
OS名:WindowsXp Professional
パソコン名:SX6130CB
ソフト関連:起動しない
使用回線:ADSL
--
http://pasokoma.jp/bbsb/lg359231.html からの引き続きの質問
(似た現象に陥っており質問をする場合も含みます)
CPUを AMD Athlon XP 2000+ Palomino FSB133(266) / AX2000DMT3C (動作確認済/中古品)
メモリを 184DR512M638,WB,Y410 512MB DDR-266MHZ-CL2.5 9105-0022M 0205
と SMD-51228WH1-H 404C DD400/512MB (中古 動作確認済みと書いてありました)
HDDを Segate ST3120814A 120GB Barracuda HDD (星野金属のデスクトップPCに搭載されていたものです。
未使用、BIOSでの認識確認済と書いてありました)
電源 350W 静音電源 SW-350 Pen4/AthlonXP対応 SW Technology社製
電源はまだ届いていないのですが、電源以外を交換すると起動後
ブルーの画面で
A problem has been detected and windows has been shut down to prevent damage
to your computer.
If this is the first time you've seen this stop error screen,
restart your computer. If this screen appesrs again, fllow
these steps :
Check to be sure you have abequate disk space. If a driver is
identified in the stop message ,disable the driver or check
with the manufacturer for driver updates. try changing video
adapters.
Cheke with your hardware vendor for any BIOS updates. Disable
BIOAS memory options such as caching or shadowing. if you need
to use safe Mode to remove or disable components, restart your
computer, press F8 to select Advancad Startup Options, and then
select Safe Mode.
Technical information:
*** STOP: 0x0000007E (0x0000005,0xF75AC6AE,0xF79FB158,0xF79FAE58)
*** ACPI.sys - Address F75AC6AE base at F759300, Datestamp 3d6dd69f
と出てしまい
CPUだけを新しい物にすると起動できるのですが認識されておらず
CPUを新しいまま新しいメモリを一枚だけ交換すると起動はするものの認識されず
CPUを新しいままメモリを二枚とも交換すると「ピー−−ピピッ ピープー」
という音が鳴り起動できなくなり
メモリ、CPUをものにしても起動できなくなりました。
--
== 掲示板URL: http://pasokoma.jp/ ==
配信の停止: http://pasokoma.jp/taikai.shtml
本メールマガジンへの返信はなさらないで下さい
== 投稿はパソコン困りごと掲示板でお願い致します ===